Library documentation¶
Library made for home automation around an ESP8266.
Usage¶
To use this script in your firmware, it should be placed into micropython filesystem using ampy or rshell and imported, e.g:
from pcf8574 import PCF8574.
To minimize memory usage, the official documentation has been followed.
In order to minimize file size on the system, scripts on the main branch of this repository do not contain docstrings. Thus, a special branch has been made with documented scripts.
Precompilation¶
To save space and time, scripts could be pre-compiled as follow.
Bytecode¶
This method will generate micropython bytecode .mpy files that can be
imported just like normal scripts after installed in the filesystem.
In order to get bytecode, you need to compile the cross-compiler
mpy-cross (compiled by default with the firmware), it can be used like
this:
MICROPYTHON_ROOT_DIR/mpy-cross/mpy-cross pcf8574.py
Freezing module¶
However, these files still reside in filesystem.
To optimize further, they can be freezed into the firmware (Flash memory). This will make them permanent.
This can be done by placing them inside target’s modules or scripts folder, e.g:
MICROPYTHON_ROOT_DIR/ports/esp8266/modules/
MICROPYTHON_ROOT_DIR/ports/esp8266/scripts/
The difference between the two is that scripts in modules folder gets
compiled into bytecode with mpy-cross tool like above, while those in
scripts will be just freezed into Flash. Note that only .py scripts should
be placed in both folders as anything else can cause firmware corruption.
After placing scripts in either of them, rebuild is needed. This will generate
new firmware image that can be flashed like usual. The scripts are immediately
available using the import syntax from above.
Neither of these files will be visible when listing the filesystem with
os.listdir().